Paramondo LINE Montageanleitung Seite 75

M
Grid
230 V / 50 Hz
Connect the motor according to the connection instructions. To prevent that water penetrates the motor, the connection cable should be
always laid downwards with a loop.
TIP: For the connection of the power grid to the awning motor we advise to use the Hirschmann plug set. You can find it in our shop under
the article number 10050625.
Connection side motor
PE = (green-yellow)
2 = (black/brown)
1 = N (blue)
After the connection the motor vibrates briefly and enters automatically for 10 seconds in learning mode. Since the enclosed radio remote
control is already programmed, it can control the awning immediately. Should this not be the case, you can program the remote control
according to the instructions!
M
L1
N
PE
Connection side grid
3
2
1
Connection and start-up
2 = L1 (brown)
3
2
1
PE = (green-yellow)
1 = N (blue)
www.paramondo.de
75
L1 = Phase (brown)
N = Neutral (blue)
PE = Protective conductor
(green-yellow)