If the result obtained is not satisfactory, it is necessary to start the configuration anew from item 4.2.
When the gate is open, it is necessary
to press the "step-by-step" button or
the remote control button in order to
perform the first closing maneuver.
During the closing maneuver, it is
necessary to press the "step-by-step"
button or the remote control button in
order to adjust the release starting
point during the closing phase. We
recommend not less than 80 cm.
Press the "step-by-step" button or the remote
control button in order to finish the con
figuration with the last opening maneuver.
After the configuration is completed, two green
LEDs will start flashing and a red LED will
become lit.
38