Installation; Determining The Direction; Installation And Fixing Of Automation - EasyWay 110 Benutzerhandbuch

2. INSTALLATION

2.1 Determining the direction

The automation installation area needs to provide space required for conducting maintenance and manual
release.

2.2 Installation and fixing of automation

a) Place the M10 fastening bolts (1) in the foundation with a pitch of 305 mm and 55 mm. Remove the
covers (2) of the fastening feet, then put the automaton on the pins (1). Level the drive with the nuts (4) and
set it parallel to the gate.
b) After correct positioning and leveling of the automat, screw it on with the nut (5) and washer. Align the
mounting leg covers (2) and install them on the snap-on legs.
28