Technical Data - Zanussi THE8301 Benutzerinformation

The display shows
1) After maximum 6 hours, the programme ends automatically.
2) It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the appliance.
• The drum is dirty.
• Incorrect setting of the conductivity sensor
( See chapter "Settings - Adjustment of the

TECHNICAL DATA

Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Total power
Energy efficiency class
Energy consumption on the standard cotton pro-
gramme with the full load.
Problem
.
1)
Possible solution
The laundry is too wet. Spin the laundry in the
washing machine again.
Ensure that the room temperature is higher than
+5°C and lower than +35°C. Optimal room tem-
perature is 18°C to 25°C.
Set the Zeitprogramm (Time Drying or the Extra-
trocken (Extra Dry) programme.
If you want to set a new programme, deactivate
and activate the appliance.
Make sure that the options are suitable for the
programme.
remaining laundry moisture degree " for better
setting).
• The airflow slots are clogged.
• Room temperature is too low or too high
( optimal room temperature 18°C to 25°C )
850 x 596 x 638 mm (maximal 662 mm)
1107 mm
958 mm
850 mm (+ 15 mm - feet regulation)
118 l
8,0 kg
230 V
50 Hz
67 dB
700 W
A+++
1,49 kWh
2)
19