Child Lock Function - Zanussi THE8301 Benutzerinformation

SETTINGS
F
A. Trockenzeit (Time Dry) touch button
B. Start/Pause touch button
C. Zeitvorwahl (Delay Start) touch button
D. Knitterschutz (Extra Anticrease) touch
button
E. Reverse Plus touch button
F. Trockengrad (Dryness Level) touch button

CHILD LOCK FUNCTION

This option prevents children playing with the
appliance while a programme is operating. The
touch buttons are locked.
Only the on/off button is unlocked.
Activating the child lock option:
1. Press the on/off button to activate the
appliance.
2. Press and hold touch button (D) for a few
seconds.
The child lock indicator comes on.
It is possible to deactivate the child
lock option while a programme
operates. Press and hold the same
touch buttons until the child lock
indicator goes off. The Child Lock
function isn't available for 8 s after
switching on the appliance.
ADJUSTMENT OF REMAINING LAUNDRY
MOISTURE
Every time you enter in the
"Adjustment of remaining laundry
moisture" mode, previously set degree
of remaining moisture will change into
next value ( e.g previously set
will change into
A B
E D
).
To change the default degree of remaining
C
moisture:
1. Press the on/off button to activate the
appliance.
2. Use the programme knob to set any
programme.
3. Wait approximately 8 seconds.
4. Press and hold buttons (F) and (E) at the same
time.
One of these indicators comes on:
•
•
•
5. Press and hold buttons (F) and (E) again until
the indicator of the correct level comes on.
If the display returns to the normal
mode (the time of the selected
programme from step 2. will be
displayed), while setting the
degree of remaining moisture,
press and hold buttons (F) and (E)
once again to enter to the
"Adjustment of remaining laundry
moisture" mode (previously set
degree of remaining moisture will
change into next value).
6. After 5 s the display returns to normal mode.
WATER CONTAINER INDICATOR
By default, the water container indicator is on. It
comes on when the programme is completed or
when it is necessary to empty the water container.
If a draining kit is installed (additional
accessory), the appliance
automatically drains the water from the
water container. In this case we
recommend that you deactivate the
indicator of the water container.
Deactivating the water container indicator:
1. Press the on/off button to activate the
appliance.
2. Wait approximately 8 seconds.
3. Press and hold touch buttons (E) and (D) at
the same time.
The display shows one of these 2 configurations:
• The display shows "Off". After 5 s the
display returns to normal mode.
• The display shows "On". After 5 s the
display returns to normal mode.
the maximum dryness
the more dry laundry
the standard dry laundry
11