Sharp VC-GH60SM Serviceanleitung Seite 24

VC-GH61GM/SM,GH611GM
VC-GH60SM,GH600SM,GH601SM
VC-FH310GM/SM
4-22 INSTALLING THE SHIFTER
Capstan D.D.
motor
(Bottom side of mechanism chassis)
Figure 4-36.
b
Loading arm (T)
Shifter
*Not run on the
sifter.
Sifter
Drum
Tension arm
c
1. Make sure that the loading arm T and S are at the Phase-
Matching point as shown below a.
2. Fix the shifter position setting part to the roading arm T
position setting part as shown in figure b.
3. Make sure tension arm not run on the shifter as shown
in figure c.
Insert point
Figure 4-37.
24
a
Loading arm (T)
Loading arm (S)
Phase matting