Filter Maintenance - Passion Spas Renew Anleitung

6. Filter maintenance

Your filter system is vital for the quality of your spa water.
hold the capacity to filter correctly and therefore put pressure on the jet engine of your spa;
this could even shorten the lifespan of the machine.
A spa filter cartridge c ons i s ts of polyester micro pores folded filter material, wh ic h was
des i g ne d t o f i l te r th e t i ni es t im pur it i es f r om the wa ter (f or rem o v in g t he f i l ter) .
Passion spas Filters ha ve a s urf ac e of 4.65 m
of the spa, two filters are used that are especially designed for a maximum range to catch
floating particles in the water).
It is recommended to clean the spa filter cartridge every week (or more often if the spa is used
intensively). Use a garden hose and aim the stream of water at a 45°angle to the ground.
Check if the dirt comes off when you rinse every fold of the filter. The filter cartridge should at least
be cleaned with a garden hose and then soaked in a cleaning solution for 24 hours, according to
the instructions, at least every 2 to 4 months.
It is recommended to have a set of extra filters at hand so that you can use your spa during the
soaking process of the filters. This will result in a longer lifespan of the filters. If you are using
the filter rotation system, let the filters dry so that they can be switched immediately the next
time the filters are cleaned.
Do not
• use a brush to clean the filter.
• use washing liquid or all-purpose cleaner for soaking the filters. This will result in a
lot of foam in your spa.
• use a hydro-blaster to clean the filter cartridges, the high water pressure will damage the
materials.
• use hydrochloric to soak or clean the filters. The acid will shorten the lifespan of the
filter and is a health hazard.
Polluted or worn filters do no longer
2
of filter material (depending on the content
22