Remote Control Functions - HifiPilot Surround Hub Bedienungsanleitung

Lock source volume:
The volume of a specific source can be locked in the following way:
1. Select the source you want to lock the volume on.
2. Set the volume to which you want to lock the source.
3. Press and hold the remote's mute button for 5 seconds until the input LED
flashes once.
Note: To unlock the volume, select the respective source and press the mute button
again for 5 seconds.

Remote control functions

ON / OFF: Use this button to switch the Surround Hub on or off.
Volume indicator: The LEDs show the current volume of the
Surround Hub. To adjust the volume, press the "Up" or "Down"
arrow on the directional pad.
Mute: Use this button to mute or unmute the Surround Hub.
Previous, Play/Pause, Forward: You can use these buttons to
control the sound playback.
Source indicator: The lit LED indicates the selected source. To
change the source selection, press the left or right arrow on the
directional pad.
9