Audio Playback - HifiPilot Surround Hub Bedienungsanleitung

Setup with PC (No Google account required)
1. Turn on the Surround Hub. Wait until the WiFi LED on the front panel flashes
quickly (WiFi configuration mode).
2. Use a PC to connect to the "Surround Hub_XXXXXX" WiFi network.
3. Open your web browser and enter the following text in the search bar:
"192.168.43.1".
4. On the displayed page, select your WiFi under "Network" and enter the
associated password in the "Password" field. Confirm this information with the
"SAVE" button.
5. If setup is successful, the WiFi LED on the front panel will be solid (network
connection).
HDMI:
RCA:
Optical:

Audio playback

1. Connect the desired source to one of the three HDMI
inputs on the back of the Surround Hub using an HDMI
cable (version 1.4 or newer).
2. Select the appropriate "HDMI" input as the source on the
remote control.
1. Connect the desired source to the RCA input on the back
of the Surround Hub using a RCA cable.
2. Select "LINE" as the source on the remote control.
1. Connect the desired source to one of the S/PDIF inputs
on the back of the Surround Hub using an optical cable.
2. Select the appropriate "OPT" input as the source on the
remote control.
14