Automatic Standby - HifiPilot Surround Hub Bedienungsanleitung

Google Chromecast:
DLNA:
Depending on the setting selected in "Menu -> System Setup -> Automatic Standby",
the Surround Hub switches itself to standby mode when there is no signal. When a
signal is present again, the hub automatically detects it and switches itself on.
Note: When Surround Hub goes to standby from LINE or Optical inputs, it is only
able to wake up again from the input it was using before it went to standby.
1. Make sure the source device and Surround Hub are on
the same network.
2. Open the desired playback app.
3. Tap the Chromecast icon in the app and select the
Surround Hub as the playback device.
4. When the connection is established, the Surround Hub
will automatically select WiFi as the source.
5. If another source is selected, playback is automatically
paused. If WiFi is selected as the source again, playback
will continue automatically.
1. Make sure the source device and Surround Hub are on
the same network.
2. Open the desired DLNA playback app.
3. Select the Surround Hub in the app as the playback
device.
4. When the connection is established, the Surround Hub
will automatically select WiFi as the source.
5. If another source is selected, playback is automatically
paused. If WiFi is selected as the source again, playback
will continue automatically.

Automatic standby

16