HifiPilot Surround Hub Bedienungsanleitung Seite 10

Bluetooth visibility:
● Invisible: Press and hold the back button for 3 seconds. When the input LED
is flashing, Bluetooth is invisible and no new devices can be connected.
● Visible: Press and hold the forward button for 3 seconds. When the input
LED flashes, Bluetooth is visible and new devices can be connected.
The Surround Hub can be easily paired with all WiSA-certified speakers.
Pairing the speakers
1. Preparing the speakers
2. Pairing with the Surround Hub
● Place all the speakers in the
intended position.
● Turn on the speakers and put them
in pairing mode. To do this, press
and hold the pairing button on all
speakers that you want to connect
to the hub for 3 seconds.
● The speaker is in pairing mode
when the rear LED flashes.
● Briefly press the pairing button on
the back of the Surround Hub.
● The rear WiSA LED then flashes
slowly.
● This function can also be accessed
using the menu in the OSD.
10