HifiPilot Surround Hub Bedienungsanleitung Seite 8

In order to be able to control the Surround Hub with the remote control, it is
necessary to pair the remote control with the Surround Hub.
Pairing the remote control
1. Insert the batteries
● Remove the base plate of the
remote control using the Allen key
provided.
● Insert the batteries.
● Pay attention to the polarity of the
batteries, which is indicated inside
the battery compartment.
2. Enable pairing on the Surround Hub
● Press and hold the pairing button
on the back of the Surround Hub
for 3 seconds until the WiSA LED
on the back of the Surround Hub
flashes rapidly.
3. Complete pairing
● Press any button on the remote
control.
● If pairing is successful, the WiSA
LED on the back of the Surround
Hub will stop flashing.
● When you press any button on the
remote control, the WiSA LED on
the back of the Surround Hub
flashes briefly.
8