Adjustment Of The Spring-System; Cable Management And Hex-Key Storage - ONKRON GM25 Benutzerhandbuch

4. Adjustment of the spring-system

To properly balance the mount with the screen installed, adjust spring tension using the
supplied hex-key M as shown on the picture:
М
Align the arm of the mount horizontally, as shown on
the scheme:
IMPORTANT: To avoid screen damage,
continuously hold the arm horizontally while
making all spring adjustments until it stays
in the horizontal position.

5. Cable management and hex-key storage

Step 1. Gently slide the upper cable management
panel and take it off.
Step 2. Feed the cables through the keyholder and
both cable management slots.
Step 3. Slide the LOWER cable management panel
upwards to its original position.
Step 4.Slide the UPPER cable management panel into
position.
M
L
5. Put both hex-keys L and M into key holder E.
10
Heavy screens: If the screen is falling down,
turn the adjustment screw clockwise (+) until it
stays in horizontal position.
Light screens: If the screen is raising up, turn
the adjustment screw counterclockwise (-)
until it stays in horizontal position.
DO NOT overtighten the adjustment
screw!
Step.2
Step.3
Step.2
Step.2
Step.4
Step.1