Wall Installation Method Of The Tv Stand To The Wall; Installation Of The Bracket For Fixation On A Concrete Wall With Thickness Of Plaster 5 Mm (0.2") - ONKRON TS1220 Benutzerhandbuch

8. Wall installation method of the TV stand to the wall:

8.1 Installation of the bracket for fixation on a concrete wall
with thickness of plaster 5 mm (0.2"):
• Put the bracket (H) to the wall at a distance
of 43.3" – 53.1" (1100 – 1350 mm) from the
floor. Mark drilling spots of the first bracket.
Put the bracket away for a while.
• Put the second bracket (H) at a distance of
15.7" – 25.6" (400 – 650 mm) from the first
bracket (H). Mark drilling spots of the
second bracket.
• Drill 1.6" (40 mm) deep holes using a Ø7mm
(9/32") drill.
1.6"
(40 mm)
• Insert dowels (L) in the holes. You may use a hammer, if you need.
The dowels must be completely in the holes.
• Install both brackets (H) to the wall,
using screws (K).
• Tighten screws with wrench (J).
H
K
J
H
L
• Carefully bring the TV
stand to the wall.
9