Schritt 2. Entfernen Sie die Tropfsensor-Baugruppe.
❶ Drücken Sie die Verriegelung nach oben.
a.
❷ Schieben Sie die Tropfsensor-Baugruppe nach hinten. Heben Sie dann die Tropfsensor-
b.
Baugruppe an, um den Sensorpfosten zu lösen, und ziehen Sie sie aus dem Gehäuse.
Abbildung 69. Tropfsensor-Baugruppe entfernen
Abbildung 70. Tropfsensor-Baugruppe
Tabelle 21. Tropfsensor-Baugruppe
Anschluss
1
Nach dieser Aufgabe
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
88
ThinkSystem SD650 V2/SD650-N V2 Neptune DWC Einbaurahmen und DW612 Neptune DWC GehäuseWartungshandbuch
Verriegelung
2