Intended Use - Optimum optisaw S 181 Betriebsanleitung

Read the operating
instructions before
commissioning!
Use protective boots!
Protect the environment!
1.3

Intended use

Use
WARNING!
In the event of improper use, the metal band saw

will endanger personnel,

the machine and other material property of the operating company will be endan-
gered,

the correct function of the machine may be affected.
The machine is designed and manufactured to be used in environments where there is no
potential danger of explosion.
The machine is designed and manufactured to saw cold metal, cast material and plastics or
other material that are not health hazardous and do not generate dust.
The metal band saw must not be used on wood.
The pieces to be cut must be of a shape that will allow them to be securely attached in the
workholder vice and ensure that the piece does not come loose when it is being sawed.
The metal band saw must only be installed and operated in a dry and ventilated place.
If the metal band saw is used in any way other than described above, modified without authori-
zation of Optimum Maschinen Germany GmbH, then the metal band saw is being used improp-
erly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee or CE conformity will expire due to any constructive
technical or procedural changes which had not been performed by the company Optimum
Maschinen Germany GmbH.
It is also part of intended use that you

observe the limits of the metal band saw,

the operating manual is observed,

the inspection and maintenance instructions are observed.
Safety
Version 1.6.4 - 2020-08-05
Disconnect the mains plug!
Use protective suit!
Contact address
Translation of original instruction
Use protective glasses!
Use ear protection!
Use protective gloves!
Operations not in
accordance with
intended use!
S181 | S181G EN
53