Tractel Magfor Auto Betriebsanweisung Seite 25

3.3 Magfor Auto 950
The Magfor Auto 950 is able to handle loads up to 950 kg for flat material and up to 400 kg for round material. Using
a current pulse of less than one second, the Magfor Auto 950can be switched manually, using push buttons, or in
automatic mode. While lifting the load, no current is required; the workpiece remains safely held as by a permanent
magnet. Up to 500 ON/OFF switching cycles are possible before recharging the internal battery using the supplied
mains charger.
Option: Special pole shoes, to be fixed on the pole surface area with 4 screws M12, are available on request.
M 6141 FR-Magfor Auto
rev 2 – 12/2022
EN
Magfor Auto 950
Page 25/107
www.tractel.com