General Assembly Drawings And Features - Tractel Magfor Auto Betriebsanweisung

3 GENERAL ASSEMBLY DRAWINGS AND FEATURES

3.1 Magfor Auto 200
The Magfor Auto 200 is able to handle workloads up to 200 kg for flat material and up to 50 kg for round material.
Using a current pulse of less than one second, the Magfor Auto 200 can be switched manually, using push buttons,
or in automatic mode. While lifting the load, no current is required; the workpiece remains safely held as by a
permanent magnet. Up to 600 ON/OFF switching cycles are possible before recharging the internal battery using the
supplied mains charger.
M 6141 FR-Magfor Auto
rev 2 – 12/2022
EN
Magfor Auto 200
Page 23/107
www.tractel.com