Autel Robotics EVO II DUAL 640T V3 Schnellstartanleitung Seite 34

9.PREPARING THE CONTROLLER
(1)
Unfold the antenna, detach the
stick heads on the back of the
controller handle, and screw them
into the corresponding screw
holes on both sides of the screen.
(2)
Adjust the antenna angle, and when the antenna and the back of the
controller are at the angle of 180 or 260, and the antenna surface is
facing the aircraft, the signal quality of the aircraft and controller will
reach the optimal condition.
10. POWERING UP
(1)
Press and hold the power button for
2 seconds to turn on the controller.
100
o
180
o
33