Cleaning Mode; Spot Cleaning - Blaupunkt BLUEBOT COMFORT PLUS Bedienungsanleitung

USAGE OF THE ROBOT & AUTO STATION

CLEANING MODE

After the robot is powered on, it will scan and generate the map and divide
it into areas intelligently. Then sweep the areas one by one along the wall
orderly, efficiently and thoroughly and plan the cleaning route in a bow/S
shape. The robot will return to the charging station automatically after
cleaning.
NOTE
Do not move the robot casually and frequently when it is cleaning. After
moving, please put the robot near the original position. When it starts again,
it will try to reposition itself. After successful positioning, it would follow the
planned path and continue to work. If the positioning fails, the robot would
abort previous mission, make a map and do the cleaning again.

SPOT CLEANING

When a local area needs a deep sweep, the user specifies a point on the
map on the APP, the machine will automatically drive to the vicinity of the
point, take the point as the center, and clean within 1.5m x 1.5m.
EN
13