Device Specifications; After Vacuuming; Emptying The Dust Container; Cleaning And Maintenance - Blaupunkt VCP301 Bedienungsanleitung

VCP301
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to
separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene
(bags, protective foam sheet). Your system consists of material which can be recycled and
reused if disassembled by a specialized company. Please observe the local regulations
regarding the disposal of packaging materials, exhausted batteries and old equipment.

DEVICE SPECIFICATIONS

Power Supply: DC 5V, 1A
Filter Set: Blaupunkt ACC060
1. Suction nozzles
2. Dust container
3. Power cable
4. Handle
BEFORE STARTING THE VACCUUM CLEANER
Charge up the vacuum cleaner's battery. Connect the power cord's plug into the power socket on the
vacuum cleaner. Charging takes up to 3 hours.
Make sure the vacuum cleaner's dust chamber is empty, and the filters are correctly fitted. Attach the
crevice nozzle.
To switch on the vacuum cleaner, press the on/off switch. A fully charged battery provides
approximately 10 minutes of operation with maximum suction power.

AFTER VACUUMING

Empty the container and clean the filters.

EMPTYING THE DUST CONTAINER

To empty the container and clean the filters, remove the container.
To remove the container, rotate the container gently and remove it.
Remove the filters installed in the container. Empty the container of the dust. Clean the filters.
To replace the container, follow the steps above in reverse order.

CLEANING AND MAINTENANCE

Regularly clean the suction nozzles and container, of dust.
The cleaner's body should be wiped with a slightly damp cloth, and then immediately wiped dry.
Clean the filters each time you empty the dust container. It is recommended to clean the filters
thoroughly under running water. After washing the filters, refit them only when they are completely
dry.
It is recommended to change the HEPA filter every 3 months, depending on how heavy the use.
Change the filters according to the instructions provided in the section on emptying the dust
container.
5. Power socket
6. HEPA filter
7. On/off switch
8. LED indicator
2