Usage Of The Robot; Cleaning Mode; Spot Cleaning - Blaupunkt BLUEBOT XTREME ROBOTIC Bedienungsanleitung

5. USAGE OF THE ROBOT

CLEANING MODE

After the robot is powered on, it will scan and generate the map and divide
it into areas intelligently. Then sweep the areas one by one along the wall
orderly, efficiently and thoroughly and plan the cleaning route in a bow/S
shape. The robot will return to the charging station automatically after
cleaning.
Area being cleaned
NOTE
Do not move the robot casually and frequently when it is cleaning. After
moving, please put the robot near the original position. When it starts
again, it will try to reposition itself. After successful positioning, it would
follow the planned path and continue to work. If the positioning fails, the
robot would abort previous mission, make a map and do the cleaning
again.
Area to be cleaned

SPOT CLEANING

When a local area needs a deep sweep, the user specifies a point on the
map on the APP, the machine will automatically drive to the vicinity of the
point, take the point as the center, and clean within 1.5m x 1.5m.
PARTIAL CLEANING
When the robot cannot be controlled by the mobile APP, please remove
the robot to the place you want to clean. Long press the button for 3
seconds, and the robot will clean twice within the scope of 2mx2m
centering on itself.
2m
EN
13