Herunterladen Diese Seite drucken

After Vacuuming; Emptying The Container; Cleaning And Maintenance - Blaupunkt VCH601 Bedienungsanleitung

Akku-stielstaubsauger

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
VCH601
1. Suction Nozzles
a) General Purpose Suction Brush with
Power Brush
b) Crevice Nozzle with Pull-Out Bristles
2. Power Cable with Power Adapter
3. Handle
4. Lithium Battery Cassette
5. Power Socket
6. Battery Release Button
7. Power Button
BEFORE STARTING THE VACCUUM CLEANER
To charge the vacuum cleaner's battery, plug the power cord into the vacuum cleaner's power socket,
and the power adapter into an electrical outlet. Charging takes up to 3 hours.
Make sure that the vacuum cleaner's dust chamber is empty and the filters are correctly inserted.
Attach the hose and the general-purpose nozzle brush with the power brush or the crevice nozzle.
To switch on the vacuum cleaner, press the power button. To adjust the suction power, press the
suction-adjustment button. A fully charged battery provides approximately 25 minutes of operation
with maximum suction power, or 45 minutes with less suction power.
WHEN THE POWER BRUSH LOCKS
When the vacuum cleaner's power brush becomes locked while vacuuming is in progress, the lock
indicator starts flashing. Switch off the device and clean the power brush. The device can be restarted.

AFTER VACUUMING

Remove the nozzle. Clean the accessories. Empty the container.

EMPTYING THE CONTAINER

To remove the container, press the container-latch-release button and remove it.
Remove the filters fitted in the container. Empty the container. Clean the filters.
To replace the container, follow the steps above in reverse order.

CLEANING AND MAINTENANCE

Clean the nozzles and container and remove the dust on a regular basis.
The main unit can be wiped with a damp cloth and then immediately wiped dry.
Clean the filters each time you empty the dust container. It is recommended to clean the filters
thoroughly under running water. After cleaning the filters, replace them only when they are
completely dry.
It is recommended to replace the HEPA filter every 4 months, and the prefilters every 2 months,
depending on the frequency of use. Replace the filters according to the instructions provided in the
section on emptying the container.
8. Suction Adjustment Button
9. Power Brush Suction Power/Lock Indicator
10. Main unit attachment
11. Hose attachment
12. Dust Container
a) Container
b) Container Latch with Release Button
c) Sponge Prefilter
d) Dense Prefilter
e) HEPA Filter
4

Werbung

loading