Cleaning And Maintenance; List Of Messages - Blaupunkt RVC701 Bedienungsanleitung

RVC701
B4. Press the power
mode.
NOTES:
1. In order for the cleaning schedule to function properly, it is necessary to program the robot's
internal time.
2. The robot will start cleaning at the scheduled time every day.
3. After turning the robot off with the main switch, the time and schedule settings will be reset.
4. To delete the schedule, set the time to 00:00.
3. Programming the schedule using the remote control
3a. Press and hold the "PLAN" button on the remote control for 5 seconds
3b. Use the arrow buttons to set the schedule time
3c. Press the "ON/OFF" button to confirm the schedule time. The robot's display will show the set time.
Note: by setting the time on the remote control, you set the start delay in relation to its system time.
Example: time indicated on the remote control is 01:30 AM, the robot's internal time: 08:00 AM, the
schedule will be set to 09:30 AM every day.
USING THE VIRTUAL WALL (MAGNETIC STRIP)
To reduce the robot's operating area, you can place the magnetic strip, which will create a virtual wall.
As the robot approaches the strip, it will recognise it, makes a turn or turns around. The strip can be
placed in the passageway between rooms or used to separate the device from cables or bowls for pets.
CONNECTING THE DEVICE WITH THE WIFI NETWORK AND APPLICATION
Note: The robot only uses a 2.4 GHz network. Make sure the router provides this connection.
Install the BlueBot APP on your phone. It is available from Google Play or Apple store. You can also scan
the following code to load the appropriate link:
QR
Next, follow the instructions shown in the application:
1. Register a user account
2. Select the compatible model
3. Reset the vacuum cleaner connection parameters by pressing and holding the power button for 3
seconds
4. Connect the phone directly to the network generated by the robot named "RVC_xxxx"
5. The application will ask you to enter the name of the WiFi network and the network access password
6. If the robot establishes a network connection, a message will appear on the display saying "CONN".
In case of an error message, repeat the connection procedure by entering the correct network
parameters.
The application allows you to control the basic functions of the robot and monitor its operation. The
application contains a detailed user manual for the application.

CLEANING AND MAINTENANCE

1. Emptying and cleaning the dust bin:
Pull out the bin. Remove the cover and the internal filter. Empty the bin.
The bin may be cleaned under running water (do not wash in a dishwasher or washing machine). Clean
the filter with a soft brush.
2. Cleaning the device body
Clean the device with a damp cloth, and then wipe it dry. Do not immerse the device in water.
Regularly remove any dirt that might block the air intake opening and sweeping brushes.

LIST OF MESSAGES:

button to save the changes. Press the "PLAN" button to exit the schedule setting
6