Siemens CT7 Serie Gebrauchsanleitung Seite 63

Fault
Milk froth quality var-
ies widely.
Coffee is not dis-
pensed or has slowed
to a trickle.
Set quantity is not
reached.
Coffee has no crema.
Coffee is too acidic.
Coffee is too bitter.
Coffee tastes burnt.
Cause and troubleshooting
Milk froth quality depends on the type of milk or plant-
based alternative used.
▶ Optimise the result through the selection of the milk
or vegetable-based drink type.
Grinding level is set too fine.
▶ Set a coarser grinding level.
Heavy build-up of limescale in the appliance.
▶ Descale the appliance.
Air is in the water filter.
Immerse the water filter in water with the opening
1.
facing upwards until no more air bubbles escape.
Reinsert the filter.
2.
Appliance is soiled.
▶ Clean the brewing unit.
▶ Descale and clean the appliance.
Type of coffee is not optimal.
▶ Use a coffee variety with a higher proportion of Ro-
busta beans.
▶ Use beans with a darker roast.
Beans are no longer fresh.
▶ Use fresh beans.
Grinding level is not appropriate for coffee beans.
▶ Adjust the grinder to a finer setting.
Grinding level is set too coarse.
▶ Adjust the grinder to a finer setting.
Type of coffee is not optimal.
▶ Use a coffee variety with a higher proportion of Ro-
busta beans.
Use beans with a darker roast.
▶
Grinding level is set too fine.
Set a coarser grinding level.
▶
Type of coffee is not optimal.
Change the coffee variety.
▶
Grinding level is set too fine.
▶ Set a coarser grinding level.
Type of coffee is not optimal.
▶ Change the coffee variety.
Coffee temperature setting is too high.
Troubleshooting en
63