Dismantling
Unscrew the base appliance 1
♦
anticlockwise from the tap. If
you are using a garden hose,
push the front part of the coupler
back and pull off the base ap-
pliance 1.
♦
Push all of the distributor
tubes q/w out of the hose
holders 9/0.
Pull the hose holders 9/0
♦
out of the ground.
♦
Dismantle the distributor
tubes q/w from all parts.
Cleaning
ATTENTION
►
Do not use caustic, abrasive
or solvent-based cleaning
materials. They can damage
the surfaces of the product.
♦
Clean the product using a
damp, lint-free cloth.
♦
Clean the connections from
time to time to ensure a tight fit.
│
GB │ IE
■
8
Cleaning the base appliance
♦
Unscrew the garden hose sec-
tion anticlockwise from
the base appliance 1.
♦
Remove the sieve and clean
it under running water.
♦
Replace the sieve in the base
unit 1.
♦
Screw the garden hose section
clockwise into the base appli-
ance 1.
Storage
♦
Completely empty all water-
carrying parts of the product.
♦
Let the product dry completely
before storage.
♦
Store the product in a frost-
proof location to prevent frost
damage.
PTBS 30 A1