Connecting A Usb Device; Connecting An Android Smartphone - Kenwood DNR992RVS Schnellstartanleitung

HDMI input
7
Use HDMI cable.
When you connect the cable to HDMI terminal,
remove the fixture. After connecting the cable,
put the fixture again.
W
H
D
8 Digital Radio antenna CX-DAB1 (Optional
accessory)
!
Use of a CX-DAB1(optional accessory) as a
Digital Radio antenna is recommended.
When using a commercially available Digital
Radio antenna, the diameter of the SMB
connector must be Φ6.5 mm or less.
9 Dashboard camera interface
Connect a Dashboard Camera DRV-N520
(optional accessory). (P.24)
10 Rear View Camera Input (Audio)/ AV Audio
input (ø3.5 mini jack)
(Rear Camera/ AV-IN switchable)
11 Accessory 4: GPS Antenna
Use the supplied GPS antenna. Using the GPS
antenna other than the supplied one may
cause a drop in positioning accuracy.
3rd view camera input (Yellow). See To set up
12
the camera assignment settings (P.25).
Rear view camera input (Yellow) *
13
Front view camera/Dashboard camera
14
See To set up the camera
input (Yellow).* 2
assignment settings (P.25).
15 Video output (Yellow)
16 Video input (Yellow)
*1 Connect an HD camera to Rear view camera
input terminal to use HD video.
*2 Connect an HD camera to Front view camera/
Dashboard camera input terminal to use HD
video.
Fixture
HDMI connector
W: 20.6 mm or less
H: 10.0 mm or less
D: 29.2 mm or less
Φ 6.5 mm (maximum)
1
Ñ

Connecting a USB device

Accessory 2 (1 m)
USB terminal
USB maximum power supply current :
[1]
DC 5 V = 1.5 A
[2] Sold separately
See Securing the USB extension cable
[3]
(P.24).
Ñ
Connecting an Android
smartphone
Android smartphone
(with Android Auto)
[2]
USB cable
Accessory 2 (1 m)
USB terminal
USB maximum power supply current :
[1]
DC 5 V = 1.5 A
Sold separately
[2]
See Securing the USB extension cable
[3]
(P.24).
Connection/Installation
[3]
USB device
[2]
[1]
[2]
[3]
[1]
English
23