FITFIU FITNESS MC-180 Betriebsanleitung Seite 60

STORING
FOLDING / UNFOLDING
To fold, remove (rotate left) the locking bolt (A) – this allows the belt platform to be raised. Lift the end of the belt
platform up and hold firmly so that it cannot fall, then secure the belt platform to the frame using the locking bolt (A)
and tighten (rotate right) it firmly by hand.
To unfold, hold the belt platform firmly so that it cannot fall, then remove (rotate left) the locking bolt (A) – this allows the
belt platform to be lowered. Gently lower the belt platform so the equipment is unfolded, then secure the belt platform
to the handlebar frame using the locking bolt (A) and tighten (rotate right) it firmly by hand.
ATTENTION: Always set-up the equipment on a flat and level surface. If the equipment "rocks",
(if applicable) rotate feet under front of machine to move up or down as needed so equipment
is steady.
STORAGE
Store the equipment in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the master
power switch is OFF ("O") and the power cord is un-plugged from wall outlet.
A
60
A