Specific Maintenance Operations For The Batteries; Chapter 14 - Extraordinary Maintenance; Chapter 15 - Leaving The Machine Unused For Long Periods; Chapter 16 - Dismantling/Demolition - Comet CSW 700 Bedienungs- Und Wartungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

- Instructions and operating manual CSW 700 B/G - CSW 900 B/G (translated from original instructions)

OBSERVE THE RULES AND PRECAUTIONS PROVIDED IN CHAPTER 7 "SAFETY STANDARDS".

1. In order for the batteries to last for a suitable amount of time, whether they are flat or tubular, never

let them go completely flat. COMPLETELY FLAT BATTERIES (INCLUDING NEW ONES) CANNOT BE

RE-CHARGED.

2. Check the level of battery solution frequently, and add distilled water only, as needed.

3. Always re-charge the batteries without interrupting the cycle.

EXTRAORDINARY MAINTENANCE MEANS ANY OPERATION NOT INCLUDED IN THE CHAPTER

ROUTINE MAINTENANCE. ALL SPECIAL MAINTENANCE OPERATIONS HAVE TO BE MADE BY MA-

NUFACTURER'S OR DEALER'S QUALIFIED STAFF ONLY.

CHAPTER 15 – LEAVING THE MACHINE UNUSED FOR LONG PERIODS

ƒ MODELS IN ENDOTHERMIC VERSIONS:

Leave the machine running to use all the petrol in the tank.

Once the machine stops for lack of fuel, wait for the motor to cool down and Thoroughly clean the

filters and refuse container.

ƒ MODELS IN ELECTRIC VERSION:

Remove the batteries from their housing and store them in a cool ventilated place. The batteries, even

if not used, must be recharged every 30 - 40 days. After the same period check the level of sulphuric

acid solution and top up if necessary. Thoroughly clean the filters and refuse container.

THE DESTRUCTION OR DEMOLITION OF THE MACHINE MUST BE CARRIED OUT BY THE OWNER

WITH TOTAL OBSERVATION OF THE LAWS IN FORCE. IT IS ADVISABLE TO UTILISE COMPANIES

SPECIALISED IN THIS SECTOR.

The packaging material can be

recycled. Please do not throw the

packaging material into household

waste; please send it for recycling.