Parts Description; Functional Description - Makita ML010G Betriebsanleitung

Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop appliance operation
and charge the battery cartridge when you
notice less appliance power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room tempera-
ture at 10 °C - 40 °C (50 °F - 104 °F). Let a hot
battery cartridge cool down before charging it.
4. When not using the battery cartridge, remove
it from the appliance or the charger.
Charge the battery cartridge if you do not use
5.
it for a long period (more than six months).

PARTS DESCRIPTION

► Fig.1
1 Lighting area change button
4 Power switch button
7 Hole for padlock
10 Battery cover (LXT battery)
13 AC outlet
16 Socket cover
NOTE: The shape of the AC inlet, AC outlet and power cord plug varies from country to country.
FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the appli-
ance is switched off and the battery cartridge is
removed before adjusting or checking function on
the appliance.
Installing or removing battery
cartridge
CAUTION:
Always switch off the appliance
before installing or removing of the battery
cartridge.
CAUTION:
Hold the appliance and the bat-
tery cartridge firmly when installing or removing
battery cartridge. Failure to hold the appliance and
the battery cartridge firmly may cause them to slip off
your hands and result in damage to the appliance and
battery cartridge and a personal injury.
CAUTION:
Be careful not to trap finger(s)
between the appliance and battery cartridge when
loading battery cartridge as well as between the
appliance and the battery cover when closing the
battery cover.
SERVICE
1.
2.
3.
2 Brightness indicator
5 Battery indicator
8 Battery cover (XGT battery)
11 Breaker restart button
14 Hook for power cord
17 Power cord
To install the battery cartridge, release the cover lock,
and open the battery cover.
► Fig.2: 1. Cover lock 2. Battery cover
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click.
Then close the battery cover.
► Fig.3: 1. Button 2. Battery cartridge
To remove the battery cartridge, slide it from the
appliance while sliding the button on the front of the
cartridge.
fully. If not, it may accidentally fall out of the appli-
ance, causing injury to you or someone around you.
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: Up to 4 battery cartridges can be installed,
although the appliance uses one battery cartridge for
operation.
8 ENGLISH
This appliance service must be performed only by
qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in
a risk of injury.
When servicing this appliance, use only identical
replacement parts. Use of unauthorized parts or
failure to follow maintenance instructions may
create a risk of electric shock or injury.
Do not incinerate this appliance, even if it is
severely damaged. The batteries can explode in a
fire. Dispose of the appliance in accordance with
the local regulations.
3 Brightness change button
6 Carrying handle
9 Cover lock
12 AC inlet
15 Reflector
- -
CAUTION:
Always install the battery cartridge
CAUTION:
Do not install the battery cartridge