Changing Brightness - Makita ML010G Betriebsanleitung

OPERATION
CAUTION:
This appliance is intended for
commercial use. Do not use the appliance for
household purpose.
Turning on / off the appliance
Press the power switch button to turn on the appliance.
Press the power switch button again to turn off the
appliance.
► Fig.10: 1. Power switch button
NOTE: The appliance turns on at the same mode as
the last setting.

Changing brightness

Press the brightness change button while the appliance
is operating. The brightness decreases every time you
press the brightness change button. The brightness
will return to the highest when operating in the lowest
brightness.
► Fig.11: 1. Brightness change button
Changing lighting area
Press the lighting area change button while the appli-
ance is operating.
► Fig.12: 1. Lighting area change button
The lighting area changes every time you press the
lighting area change button as illustrated.
► Fig.13
Using with AC power
WARNING:
Never use the appliance when the
cord or plug is damaged.
WARNING:
Do not handle the plug with wet or
greasy hand.
WARNING:
Do not leave the power cord dis-
connected from the appliance while the power is
supplied from the mains. Small children may put the
live plug in their mouth and cause injury.
WARNING:
Do not put the live plug or cord
into your mouth. Doing so might cause an electric
shock.
WARNING:
Make sure that the voltage rating
of the main power supply corresponds with that
of the appliance.
WARNING:
An outlet that is plugged must be
grounded.
When using the appliance with AC power, use the
power cord supplied with the appliance.
Insert the plug to AC inlet of the appliance and then
insert the other end to an outlet.
► Fig.14: 1. Power cord 2. Socket cover (AC inlet)
3. Plug (for the appliance) 4. Plug (for an
outlet)
CAUTION:
Be sure to insert the plug into the
appliance first, then insert the other end to an
outlet.
CAUTION:
Always close the socket cover
firmly when the power cord is not plugged.
NOTE: Even operating in DC power, the appliance
automatically changes to AC power when the power
cord plugged in.
NOTE: The AC power does not charge the battery
inserted to the appliance.
NOTE: The shape of the AC inlet, AC outlet and
power cord plug varies from country to country.
Interconnected use
CAUTION:
Do not connect any appliance other
than ML010G to AC outlet.
CAUTION:
Always use the power cord supplied
with the appliance.
CAUTION:
Do not interconnect appliances
beyond the maximum number of interconnectable
appliances specified in the instruction.
When using the appliance interconnected with other
appliances, connect them with the power cord.
Insert the plug into the AC inlet of the appliance to be
powered, and then insert the other end to the AC outlet
of the appliance to power.
► Fig.15: 1. AC outlet
NOTE: When using the appliances interconnected,
operations such as turning on / off, changing bright-
ness, and changing lighting area are not linked. Each
appliance needs to be operated.
Organizing the power cord
Coil the power cord on the hook for power cord tightly.
► Fig.16: 1. Power cord 2. Hook for power cord
MAINTENANCE
CAUTION:
Always be sure that the appliance
is switched off, unplugged, and the battery car-
tridge is removed before attempting to perform
inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
10 ENGLISH