Setting The Reception Sensitivity - Silvercrest SWED 250 A1 Bedienungsanleitung Und Serviceinformationen

SilverCrest SWED 250 A1

Setting the reception sensitivity

The DX function is activated in the original condition of the device. This is
indicated by "DX" [29] on the display [8] when the device is switched on.
Use the DX function if you would like to use the device in normal
operation.
Switch off the DX function if only stations with a high field strength are to
be received. This is recommended, for example, if a desired weak local
station is superimposed by stronger national channels.
To switch off the DX function, press the DX button [18] when the device is
switched on. The "DX" indicator [29] then fades out from the display [8].
Press the DX button [18] again to switch on the DX function again.
120 - English