Selecting A Saved Station; Alarm Function - Silvercrest SWED 250 A1 Bedienungsanleitung Und Serviceinformationen

Selecting a saved station

 In order to select a saved station, the device must be in use. Switch on
the device with the POWER ON/OFF button [10] if it is switched off.
 Press the M– [2] or M+ [3] button to select another station
(programme preset).

Alarm function

Make sure that the time is set correctly (see page 112 - Setting the time).
You can set the alarm function only when the device is switched off. Switch
off the device with the POWER ON/OFF button [10] if it is switched on.
 Press the ALARM button [16] once to activate the alarm function with
alarm tone. If only the backlight was switched on when you pressed
the button, you must press the ALARM button [16] again. The alarm
time and the symbol
 Press the ALARM button [16] twice to activate the alarm function with
radio. If only the backlight was switched on when you first pressed the
button, you must press the ALARM button [16] again. The alarm time
and the symbol
 While the alarm time is flashing, you can set it.
With the radio alarm function, the device automatically
switches itself on at the set alarm time with the last set
volume, the established frequency and the last tuned
frequency band.
[32] then flash on the display [8].
[31] then flash on the display [8].
SilverCrest SWED 250 A1
English - 115