Connecting The Headphones; Backlight; Setting The Sensitivity - Silvercrest SWE 100 B1 - IAN 73607 Bedienungsanleitung

Connecting the Headphones

You can connect the supplied headphones SWE 100 B1 to the
headphones connector [20]. While the headphones are plugged in, the
speaker [18] is muted automatically.

Backlight

While the device is powered on or off, press the LIGHT ☼ button [11] to
turn the backlight on for approx. 5 seconds.
While the backlight is on you can press the LIGHT  button [10] to turn it
off.

Setting the Sensitivity

Slide the DX/LOCAL switch [19] to the "DX" position to use the device in
normal mode.
Slide the DX/LOCAL switch [19] to the "LOCAL" position to receive strong
broadcasting station signals only. This is recommended whenever a
weaker local station is receiving interference from a stronger non-local
station.
Do not use any headphones other than the supplied
SWE 100 B1. Different headphones can produce
harmful sound pressure levels.
Multi-Band Tuner SWE 100 B1
English - 127