Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling; Storage And Transport; Ordering Replacement Parts - EINHELL GC-CG 3,6/70 Li Originalbetriebsanleitung

7. Cleaning, maintenance and
ordering of spare parts
Danger!
7.1 Cleaning
•
Keep all safety devices, air vents and the mo-
tor housing free of dirt and dust as far as pos-
sible. Wipe the equipment with a clean cloth
or blow it with compressed air at low pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth. Do not use cleaning agents or solvents;
these could attack the plastic parts of the
equipment. Ensure that no water can seep
into the device. The ingress of water into an
electric tool increases the risk of an electric
shock.
•
The shears should be cleaned thoroughly
every time before and after use. A few drops
of oil (for example sewing machine oil) ap-
plied to the blades improve the cutting perfor-
mance. However, never apply grease to the
blades.
•
To guarantee a constant exact cut it is ne-
cessary that grass residues and dirt are also
removed from the top and bottom blades.
7.2 Maintenance
•
For good cutting performance the blades
should always be sharp. They can be therefo-
re be resharpened with a whetstone. In parti-
cular we recommend to remove notches and
ridges which are produced on the blades by
stones or the like.
•
There are no other parts inside the equipment
which require maintenance.

7.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Anl_GC_CG_3_6-70_Li_SPK13.indb 20 Anl_GC_CG_3_6-70_Li_SPK13.indb 20
GB

8. Disposal and recycling

The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.

9. Storage and transport

Remove the rechargeable battery. Store the
equipment and its accessories in a dark and dry
place at above freezing temperature. The ideal
storage temperature is between 5 and 30 °C.
Store the electric tool in its original packaging.
•
Always hold the equipment on the handle,
•
Secure the equipment against slipping if you
transport it in a vehicle.
•
As far as possible, use the original packaging
for transporting the equipment.
•
Use a transport guard for the grass and shrub
shears.
10. Faults
The machine does not work
•
Check that the battery is charged and that the
charger is working.
•
Check the cable connection from the unit to
the telescopic long handle.
If the equipment will not work in spite of the volta-
ge supply being OK, please send it to the custo-
mer service address.
- 20 -
21.06.2022 08:52:31 21.06.2022 08:52:31