Inhaltsverzeichnis
Werbung
2 Operation
2.3 Assembling/operating your garment steamer
• Do not exceed the MAXIMUM level when filling the water tank.
• Press the power button (6), the display screen icons will blink for once,
and then only the steam level icon will blink indicating that the device is
heating up. Allow the device to preheat before use. The device is ready
C
for use when the steam icon is lit continuously.
• You may switch between steam levels by pressing the power button (6).
• The garment steamer has an intelligent automatic power off function.
When the user stops operating this product for more than 8 minutes of
time, the internal control circuit will cut off power supply, and the product
will enter standby mode to ensure safety and to save energy. At the same
time, the "auto shut off indicator" blinks.
C
When there is not enough water in the tank, the pump will automatically
stop working within 25-35 seconds (Noise is normal during this process).
Finally, "No water in the tank" icon blinks.
2.4 How to steam your garment
It can be used on most fabrics as long as the fabric is hanging or where the garment steamer
can be easily used in an upright position moving over the fabric in an up and down motion.
• The garment steamer is designed to be used in an upright position on
hanging garments.
• Check garment pockets are empty and turn-ups, such as cuffs and
C
hems, are down.
• We recommend you do not steam over metal accessories. Be cautious
and steam around the metal accessories.
• You will feel vibrations and hear a subtle humming sound while steaming;
this is normal, steam facing away from you and in an upright position.
• Ensure that the fabric to be steamed is being stretched whilst steaming
for best results.
16 / EN
Garment Steamer / User Manual
Werbung
Inhaltsverzeichnis
