Genmitsu Jinsoku LC-50 Plus Benutzerhandbuch Seite 18

Assembly Guide
STEP 9: X-axis Module Assembly
1. The X-axis module is placed above the both sliders on the Y-axis as shown in the diagram, and then the
X-axis is dropped vertically.
X-axis Module
Slider
Slider
2. Take four M4*10mm screws as shown to fix the left and right module respectively with the end of the X-axis
module. (Pay attention to the priority of assembling the front-end screws, and then assemble the top-end screws)
M4*10mm Screws
16