Genmitsu Jinsoku LC-50 Plus Benutzerhandbuch Seite 15

Assembly Guide
STEP 7: Rear Module Assembly
1. Align the rear module with the Y-axis left module and the Y-axis right module respectively as shown, and then
push them closely to fit with the rear module.
Rear Module
Push
Push
2. Put the M4*10mm screws into the screw holes and tighten them with the included 4mm Allen wrench.
(Pay attention to the priority of assembling the front-end screws, and then assemble the top-end screws)
(4) M4*10mm Screws (4) M4*10mm Screws
(4)
Left Module
Right Module
Rear Module
13