Genmitsu Jinsoku LC-50 Plus Benutzerhandbuch Seite 14

Assembly Guide
STEP 6: Y-axis Right Module Assembly
1. Align the Y-axis right module with the front module, then push the two modules fit closely together.
Right Module
Front Module
Push
2. Put the M4*10mm screws into the screw holes and tighten them with the included 4mm Allen wrench.
(Pay attention to the priority of assembling the front-end screws, and then assemble the top-end screws)
(4) M4*10mm Screws
Right Module
Front Module
12