SICK DLS40 Betriebsanleitung Seite 23

5 Mounting
5.1 Solid shaft
8025313/1HX9/2022-11-15 | SICK
Subject to change without notice
Laser marked back of the encoder
1
4
2
Part number
1
Type code
2
QR code - Link to product page
3
Serial Number
4
NOTICE
• Before installation, always power off and put machine to a complete stop.
•
Always connect the U
S
signal wires.
1 Power off and put machine to a complete stop
2 Mount the coupling on the customer shaft
Figure 3: Mount the coupling on the customer shaft
(Brown) and GND (Blue) wires first before connecting the
O P E R A T I N G I N S T R U C T I O N S | DLS40
OPERATING INSTRUCTIONS
3
en
23