REMEHA iSense Bedienungsanleitung Seite 76

Problem
Solution
Problem
Solution
It takes too long for the tap water to get up to temperature.
- Boiler: the DHW standby function may be switched off.
In that case the symbol
Control the DHW standby with the DHW standby setting
(see the installation and service manual).
- Boiler: the boiler may be heated up too late.
Set the tap water temperature using the DHW
(see the installation and service manual).
The boiler supplies no hot water or hot water only briefly.
The DHW standby function
Switch the DHW standby function to Continuous (see paragraph 6.1).
is shown in the display.
may be switched off.
T001023-06-A
EN
T001254-06-A
76