Installation; Location Of The Thermostat - Remeha Isense Bedienungsanleitung

3. Installation

3.1 Location of the thermostat

The iSense is set to room control by default, which means that the inside temperature is used
to control the central heating. That is why it is best to locate the iSense on an internal wall in the
room in which you spend the most time, such as the living room.
Do not locate the controller too close to heat sources (fireplace, radiator, lamp, candles, direct
sunlight etc.), or in places where it may be draughty.
iSense RF
The following also apply for the iSense RF:
• Position the iSense at least 1 metre from equipment with electromagnetic emissions such as
washing machines, Tumble driers, wireless telephones, TVs, computers, microwave ovens, etc.
• Position the iSense so that it has good reception. Take account of the fact that objects
containing metal will affect the reception. These include steel-reinforced concrete, mirrors
and windows with a metal coating, insulating films etc.
EN
48