Horizon Hobby AeroScout S 1.1m Float Set Bedienungsanleitung Seite 3

Original Fuselage
(plastic part not included)
Assemble the Float Set – New Fuselage
1. Using the 1.5mm hex driver, install the water rudder
shaft into the water rudder.
2. Install the front strut mount using the two included
screws (M2.5 x 15mm).
Aeroscout S 1.1m Float Set
New Fuselage
(plastic part included)
M2 x 8mm
M1.7 x 6mm
M2.5 x 15mm
EN
3