Honeywell HR-40715E Gebrauchsanweisung Seite 8

Turbo fan (only Model HR-40920FE)
You can use the turbo fan (11) on its own or with the hea-
ter. The turbo fan operates with 500 Watts. You can reach
the desired room temperature faster by using the turbo
fan.
Turbo fan only
1. Press the toggle switch of the turbo fan (12) to Position
I and set the toggle switches of the radiator (2) to 0.
2. The turbo fan draws the cold air in at the front and
emits hot air laterally into the room.
3. Preset the desired room temperature with the thermo-
stat switch (4) as described in the "user instructions".
Warmth will now only be emitted by the turbo fan.
Heater and turbo fan
1. Start using the heater as described in the user instruc-
tions.
2. Press the toggle switch of the turbo fan (11) to Position I.
3. Warmth will now be emitted by both the heater and the
turbo fan.
4. We recommend you to turn the turbo fan off as soon as
the desired room temperature has been reached.
Please note: Make sure that the air intake and outlet vents
of the turbo fan are not blocked, as this can lead to over-
heating, fire or electric shock.
Overheating shut-off for the heater
1. The heater is equipped with overheating shut-off which
automatically switches the heater off if the temperature in
the appliance exceeds the normal operating temperature.
This protective device applies only to the appliance itself
and has no influence on room temperature regulation.
2. If the overheating shut-off is activated, the heater will
not function.
3. Press all the toggle switches to 0, turn the thermostat
switch (4) to the lowest position and pull the power plug
out of the power socket.
4. Allow the heater to cool for at least 20 minutes.
5. Remove any objects or use a vacuum cleaner to clean
the vents which have caused faulty running or overheating.
6. Resume using the heater as described in the "user
instructions".
CLEANING, MAINTENANCE, DISPOSAL
We recommend you to clean the heater regularly. Follow
the instructions for cleaning and maintenance so as not to
impair the functioning of the heater.
Cleaning
1. Before you start with the cleaning, switch the heater off
with all the toggle switches and pull the power plug out of
the socket. Allow the heater to cool for at least 20 minutes.
2. Clean the air intake and outlet vents of the turbo fan
with a vacuum cleaner to remove the dust from the motor
and heating element.
3. Clean the outside of the appliance with a soft, dry cloth.
Do not use water, wax, polish or any chemical cleaners.
4. Resume using the heater as described in the "user
instructions".
Disposal
This symbol on the product or its packaging
indicates that the appliance cannot be treated as
normal domestic trash, but must be handed in
at a collection point for recycling electric and electronic
appliances.
Your contribution to the correct disposal of this product
protects the environment and the health of your fellow
men. Health and the environment are endangered by
incorrect disposal.
Further information about the recycling of this product can
be obtained from your local town hall, your refuse collection
service, or in the store at which you bought the product.
This regulation is valid only in EU member states.
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes respon-
sibility for the correct use and care of this KAZ product
according to these user instructions. The purchaser or
user must himself or herself decide when and for how
long this KAZ product is in use.
WARNING: IF PROBLEMS ARISE WITH THIS KAZ PRO-
DUCT, PLEASE OBSERVE THE INSTRUCTIONS IN THE
GUARANTEE CONDITIONS. DO NOT ATTEMPT TO OPEN
OR REPAIR THE KAZ PRODUCT YOURSELF, AS THIS
COULD LEAD TO TERMINATION OF THE GUARANTEE
AND CAUSE DAMAGE TO PERSONS AND PROPERTY.
Technical modifications reserved
7
ENGLISH