BFT MAXIMA ULTRA 36 Installations- Und Gebrauchsanleitung Seite 12

EN
2.4 BAR INSTALLATION
(1)
Installation is mandatory in XL confi guration (supplied).
For STD version, it is optional (not supplied).
2.5 BAR ALIGNMENT
Electrically connect the con-
trol unit (see CSB-Xtreme
instructions)
Use the "Start" command to bring
the bar in horizontal position
TO ALIGN THE BAR WITH THE ROAD
PAVING, OPERATE THE ADJUSTABLE BAR
HOLDER.
Use the "START" command to bring
the bar to vertical position
2. Installation
M14x70
(1)
IS BOOM PS
4.2x16
Ø6
M6x20
Ø5
M5x8
Adjustable bar holder
2 x 10 mm
Opening micros-
witch cam
ADJUST THE BAR VERTICALLY OPERATING
THE CAM OF THE OPENING LIMIT SWITCH.
Ø14
Ø6x12
M6
Ø6
Ø14
M14
BOOM PS
- 12 -
Check that the bar is in horizontal
position
Check that the bar is in
vertical position