Factory Settings; Safety Information - Niceboy HIVE SPACE PODS Bedienungsanleitung

or USB port in your PC, power bank etc. Connect the charging cable to the USB-C port (4) of the
charging box. During charging, the diode (5) is orange; after being fully charged, it will turn blue.

FACTORY SETTINGS

1. Disconnect and remove the earphones from the list of all paired devices.
2. Insert the earphones into the charging box and close the box.
3. Press the reset button (3) on the back of the charging box.
4. The process is now finished, and you can pair the earphones with your device again.
SPECIFICATIONS
BT:
Supported BT profiles:
Supported codecs:
Degree of protection:
Transmission range:
Frequency:
Impedance:
Sensitivity:
Speaker:
Earphones battery capacity:
Charging box battery capacity:

SAFETY INFORMATION

Listening to music at a very high volume can damage your hearing. Do not expose the device
to fluids or humidity. Do not expose the device to extreme temperatures or try to disassemble
it. Protect the device from sharp objects and falls from height. Batteries – improper handling
(prolonged charging, short circuit, breakage by other objects, etc.) may result in fire,
overheating or battery leakage.
5.1
HFP,HSP,A2DP,AVRCP
AAC, SBC
IPX5
10 m
20Hz-20kHz
32 Ω
104db ± 3dB
13 mm
2x 30mAh
300 mAh
14