Panasonic WH-ADC0309H3E5 Bedienungsanleitung Seite 20

Menus
For installer
Menu
6.2
* * Cool
1, 2
To set various water & ambient
temperatures for cooling�
* The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�
1
* Only displayed when COOL mode is unlocked (This means when COOL mode is available)�
2
20
Default Setting Setting Options / Display
Outdoor temp. for heater ON
Temperature for
0 °C
heater ON
Water temperatures for cooling ON
and T for cooling ON�
Water temp. for cooling ON
Cooling ON
temperatures in
Compensation curve
compensation curve
or direct input�
Water temp. for cooling ON Compensation curve
Input the 4
temperature points
X axis: 20 °C, 30 °C
(2 on horizontal X
Y axis: 15 °C, 10 °C
axis, 2 on vertical Y
axis)
• If 2 zone system is selected, the 4 temperature points must also be input for Zone
2�
• "Zone 1" and "Zone 2" will not appear on the display if only 1 zone system�
Water temp. for cooling ON Direct
Set temperature for
10 °C
Cooling ON
T for cooling ON
5 °C Set T for cooling ON