Panasonic WH-ADC0309H3E5 Bedienungsanleitung Seite 19

Menu Default Setting Setting Options / Display
Water temp. for heating ON
Heating ON
temperatures in
Compensation curve
compensation curve
or direct input�
Water temp. for heating ON Compensation curve
Input the 4
temperature points
X axis: -5 °C, 15 °C
(2 on horizontal X
Y axis: 55 °C, 35 °C
axis, 2 on vertical Y
axis)�
• Temperature range: X axis: -15 °C ~ 15 °C, Y axis: See below
• Temperature range for the Y axis input:
1� WH-UD model: 20 °C ~ 55 °C
2� WH-UH model & Back up heater is enabled: 25 °C ~ 65 °C
3� WH-UH model & Back up heater is disabled: 35 °C ~ 65 °C
4� WH-UX/UQ model: 20 °C ~ 60 °C
• If 2 zone system is selected, the 4 temperature points must also be input for Zone
2�
• "Zone 1" and "Zone 2" will not appear on the display if only 1 zone system�
Water temp. for heating ON Direct
Temperature for
35 °C
heating ON
• Min� ~ Max� range is conditional as follows:
1� WH-UD model: 20 °C ~ 55 °C
2� WH-UH model & Back up heater is enabled: 25 °C ~ 65 °C
3� WH-UH model & Back up heater is disabled: 35 °C ~ 65 °C
4� WH-UX/UQ model: 20 °C ~ 60 °C
Outdoor temp. for heating OFF
Temperature for
24 °C
heating OFF
T for heating ON
Set T for heating
5 °C
ON�
EN
19