What If There Are Problems; Disposal; Technical Specifications; Warranty - Beurer FM 70 Gebrauchsanweisung

3. Then allow the hygienic cover
4. When completely dry, place the hygienic cover
Storage
If you do not intend to use the device for a long period of time, we recommend placing the hygienic cover
over the device to protect it from dust and dirt. Store the device in its original packaging in a dry en-
7
vironment, ensuring it is not weighed down by additional items.

8. WHAT IF THERE ARE PROBLEMS?

Problem
Massage heads
1
rotate too slowly.
Massage heads
1
do not move.
The device switches
off automatically after
15 minutes.
The device will not
switch on.

9. DISPOSAL

For environmental reasons, do not dispose of the device in household waste at the end of its service life.
Dispose of the device at a suitable local collection or recycling point in your country. Observe the local
regulations for material disposal. Dispose of the device in accordance with EC Directive Waste
Electrical and Electronic Equipment (WEEE). If you have any questions, please contact the local
authorities responsible for waste disposal. You can obtain the location of collection points for old
devices, for example, from the local or municipal authorities, local waste disposal companies or
your retailer.

10. TECHNICAL SPECIFICATIONS

Dimensions:
Weight:
Voltage:
Input
Output
Automatic switch-off

11. WARRANTY

Further information on the warranty and warranty conditions can be found in the warranty leaflet sup-
plied.
to dry completely.
7
Possible cause
The load on the massage heads
too great.
Device not connected to a suitable
socket.
The device has an automatic
switch-off function and switches off
automatically after 15 minutes of
operation.
Mains adapter is not connected
8
to the connection socket
device.
Mains adapter is not connected to
8
a suitable socket.
Approx. 36.5 x 34.5 x 9.5 cm
Approx. 2.1 kg
100-240 V~, 50 / 60 Hz, 0.8 A
12.0 V 3.0 A; 36.0 W
After 15 minutes
back over the device.
7
Solution
is
1
Free up massage heads
Plug the mains adapter
ble socket. Switch the device on using
the ON/OFF button.
Allow the device to cool down for
15 minutes. Press the ON/OFF button
to switch the device back on after-
6
wards.
Connect the mains adapter
on the
2
connection socket
Plug the mains adapter
ble socket.
17
.
1
into a suita-
8
to the
8
on the device.
2
into a suita-
8