Cleaning And Storage; What If There Are Problems; Technical Data - Beurer FM 200 Gebrauchsanweisung

7. Cleaning and storage

Cleaning
WARNING
• Always unplug the mains part from the socket and disconnect it from the device before
carrying out any cleaning.
• Clean the device using only the methods specified. Under no circumstances may
liquid enter the device or the accessories.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate
laundry detergent where necessary. Do not use any solvent-based cleaning products.
• For hygienic cleaning, you can also remove the massage heads individually. To do
this, press the triangle on the massage head and pull it up and off. Clean the massage
heads with a damp cloth and some liquid delicate laundry detergent where necessary.
Do not use any solvent-based cleaning products. Do not put the cleaned massage
heads back on the Achillomed
• Do not use the device again until it is completely dry.
Storage
If you do not plan to use the device for a long period of time, we recommend that you store
it in the original packing in a dry environment, ensuring it is not weighed down by additional
items. Do not place any objects on top of the massage heads.

8. What if there are problems?

Problem
Massage heads
rotating too slowly.
Massage heads do
not move.

9. Technical data

Input:
Output:
® until they are completely dry.
Cause
The load on the
massage heads is too
great.
The device is not
connected to mains
power supply.
100–240 V~, 50/60 Hz, 0.45 A
15.0 V 1.0 A
Solution
Free up massage heads.
Plug in the mains part and switch on the
device ( button).
18